While most clients opt for DBP’s full design and development service, some choose what DBP refers to as the “bid package” which includes:
- Measure
- Create client shared folder
- Photos
- Checklists
- Houzz ideabook review
- As built floor plan of affected area only
- Proposed floor plan of new/remodeled space with affected area
- Scope of work overview
- Budget ranges for different construction options
- Web meeting review
- One floor plan revision
- Introduction to DBP Network Remodeler
The pricing for the bid package is as follows:
- Single room – $750
- Multiple room or Basement – $1,250
- Addition or Exterior space – $1,950
- Show elevation and roof lines – $2,700
This client in Plainfield NJ opted for this package. Below you will find the proposed design/floor plan and scope of work.
- Demo walls to stud and subfloor (unless specified, leave mirror on wall at vanity and drywall in that area)
Option to remove mirror, cut it, and reinstall it
- Remove partition wall and framing around toilet and from shower
- Remove partition wall and door next to vanity
- Remove closet in the front of the home
- Fiberglass wall, ceiling and floor insulation
- Frame in niche near toilet
- Frame 36” high knee wall and the front and approx. 2’ of return wall for the shower
- Frame bench in the shower
- Optional niche in shower
- Frame closet to the left of the shower-install door to match existing (wood 6 panel)
Option to install semi-custom or custom cabinets in this area to be designed and priced separately
- Frame tub deck for drip in tub (ensure walkway between tub and vanity is 30”
- Relocate drain for the tub as needed, and add a shower drain to the front of the home
- Build a custom floor plan with standard curb at door in the shower
- Frameless glass door surround
- Tile on shower floor, shower walls to the ceiling, and shower sloped ceiling
Option to tile the flat shower ceiling
- Tile tub area to 4’ high
- Tile main area floor and as base trim
- Install new vanity. Vanity design to be selected by the homeowner (suggest 21” depth for maximum walkway clearance)
- New solid surface top for vanity, shower seat, and tub deck. Material to be selected by the homeowner
- Install flush-mount medicine cabinet to the left of the vanity under the HVAC register
- Install new tempered window over tub (vinyl replacement) with new wood trim
- New wood trim for existing door, new door, and window
- Electrical per plan or similar, final layout to be discussed with Client, remodeler, and electrician. Recommended recessed lights to be 4” LED.
- Moisture resistant drywall throughout, cement board in shower, where tub tile is to be installed, and ¼” on floor
Optional “mud” floor application to be discussed with the remodeler and the client.
- Paint with premium paint (Benjamin Moore or similar). Paint should be designed for bathrooms and sheen to be determined by the homeowner (note: application of some finishes, semi-gloss and above may incur additional costs)
- Install jetted tub (suggested size 36” x 66”)
- Install toilet in same location
- Install handheld/wall mount faucet in shower
The client choose to work with the network remodeler DBP introduced; LOK Designs LLC. Below you will find before and in progress pictures…follow along!