The pricing for the bid package is as follows:

• Single room – $750
• Multiple room or Basement – $1,250
• Addition or Exterior space –  $1,950
  • Show elevation and roof lines – $2,700

This client in Plainfield NJ opted for this package. Below you will find the proposed design/floor plan and scope of work.

 

• Demo walls to stud and subfloor (unless specified, leave mirror on wall at vanity and drywall in that area)

 

Option to remove mirror, cut it, and reinstall it

• Remove partition wall and framing around toilet and from shower
• Remove partition wall and door next to vanity
• Remove closet in the front of the home
• Fiberglass wall, ceiling and floor insulation
• Frame in niche near toilet
• Frame 36” high knee wall and the front and approx. 2’ of return wall for the shower
• Frame bench in the shower
• Optional niche in shower
• Frame closet to the left of the shower-install door to match existing (wood 6 panel)

Option to install semi-custom or custom cabinets in this area to be designed and priced separately

• Frame tub deck for drip in tub (ensure walkway between tub and vanity is 30”
• Relocate drain for the tub as needed, and add a shower drain to the front of the home
• Build a custom floor plan with standard curb at door in the shower
• Frameless glass door surround
• Tile on shower floor, shower walls to the ceiling, and shower sloped ceiling

Option to tile the flat shower ceiling

• Tile tub area to 4’ high
• Tile main area floor and as base trim
• Install new vanity. Vanity design to be selected by the homeowner (suggest 21” depth for maximum walkway clearance)
• New solid surface top for vanity, shower seat, and tub deck. Material to be selected by the homeowner
• Install flush-mount medicine cabinet to the left of the vanity under the HVAC register
• Install new tempered window over tub (vinyl replacement) with new wood trim
• New wood trim for existing door, new door, and window
• Electrical per plan or similar, final layout to be discussed with Client, remodeler, and electrician. Recommended recessed lights to be 4” LED.
• Moisture resistant drywall throughout, cement board in shower, where tub tile is to be installed, and ¼” on floor

Optional “mud” floor application to be discussed with the remodeler and the client.

• Paint with premium paint (Benjamin Moore or similar). Paint should be designed for bathrooms and sheen to be determined by the homeowner (note: application of some finishes, semi-gloss and above may incur additional costs)
• Install jetted tub (suggested size 36” x 66”)
• Install toilet in same location
• Install handheld/wall mount faucet in shower